Lieferland: 
Produktinformationen "Mocal Universal Ölpumpe 24V Getriebeölpumpe"
TCP3 Mocal Kühlpumpe
 
Geeignet für den Einsatz als Hinterachs- oder Getriebeölpumpe oder für Turboladerölkühlanlagen sowie wassergekühlte Brems Installationen. Diese Pumpe ist selbstansaugend und kann überall relativ zur Aufnahme positioniert werden.
 
Ein Vorfilter muss vor der Pumpe installiert werden um Schäden zu verhindern!
 
Diese Pumpe ist nicht für den Einsatz bei brennbaren Flüssigkeiten zugelassen!
 
 

DEMAND OPERATION (INTERMITTENT DUTY)

Demand Operation is considered an “intermittent duty” application. The maximum

intermittent duty cycle is that which will cause the motor to reach its maximum

thermal limits. Once the maximum thermal limit is reached, the motor must be

allowed to settle to a lower temperature ideally being ambient before resuming

operation. Running the pump at or near the maximum thermal limit for extended

period of time will shorten the life of the pump and may result in immediate pump failure.

BYPASS OPERATION (IF EQUIPED)

Models equipped with an external bypass system are designed to pump at high

pressures while at low or high flow rates. Models equipped with a bypass only will

continue to run until the power is manually turned off.

The Duplex II pumps are not recommended for continuous duty service due to limited

motor brush life. Operation at lower pressures and temperatures, however, will

extend overall pump service life. 


Angaben zur Produktsicherheit

Hersteller: Mocal Thames House · Ashford Road · Middlesex, TW15 1XB ·

EU Verantwortliche Person: Importeur: Bernhard Schlüter Hanfeldstraße 40 · 49733 Haren · info@rennsportshop.com